Precautions for use of china smart facing holder products
The product of china smart facing holder literally means a camera with a pan/tilt. The gimbal is a part that can move the camera. It can be manipulated by the controller to rotate up, down, left, and right to make up for the only defect in the monitoring direction of the fixed-point camera. The operator can control the rotation of the gimbal so that the camera monitors the direction the operator wants to look at. China smart facing holder The product's position, shooting angle, and video compatibility are the most important considerations in the application of PTZ cameras.
Notes for china smart facing holder products:
1. When choosing China smart facing holder products, it is best to choose a pan/tilt with a control input terminal and a network video input/output interface installed on the fixed position of the pan/tilt, and there is a soft spot between the fixed position and the rotating position. The connection between the control input line and the video output line of the camera and the lens formed by the spiral line. After installation and use of such china smart facing holder products, the connection wires of the rotating parts will not be damaged due to long-term use.
2. The minimum ambient illumination of the surveillance site should be ten times higher than the minimum illumination (sensitivity) required by the camera.
3. China smart facing holder products are installed outdoors or color cameras with low ambient illumination, the sensitivity should not be greater than 1.01x (F1.4), or choose a color camera that can automatically convert to black and white images under low illumination.