1、 Installation steps of customized smart facing holder:

　　1. Open the mobile app, click "My" on the home page to enter the personal center. 2. Click "Settings". 3. Click the three dots in the upper right corner and select Add Device. 4. According to the prompt operation, point the camera at the object to be photographed to complete the connection.

　　2、Shooting skills of customized smart facing holder:

　　1. After the automatic follow function is turned on, as long as you move near the subject, it will automatically track and shoot;

　　2. When the lens is far away, you can use the manual focus mode to focus;

　　3. When the lens distance is short, you can use the auto focus mode to focus;

　　3、Customized smart facing holder Other matters needing attention:

　　1. It is recommended to keep the distance between the customized smart facing holder and the object at about 2 meters (depending on the situation), otherwise the picture quality cannot be guaranteed.

　　2. It is recommended to avoid the environment with too bright or too dark light as much as possible.

　　3.customized smart facing holder It is recommended to use this product to shoot outdoors during the day.

　　4. Please turn off the power if it has not been used for a long time.

　　5. Do not arbitrarily adjust the angle and focal length during use.

　　6.Customized smart facing holder Do not disassemble or modify the machine without authorization.