Search
Search
Confirm
Cancel
NEWS
Homepage
/
News
Precautions for use of china smart facing holder products

Precautions for use of china smart facing holder products

The product of china smart facing holder literally means a camera with a pan/tilt. The gimbal is a part that can move the camera. It can be manipulated by the controller to rotate up, down, left, and right to make up for the only defect in the monitoring direction of the fixed-point camera.
Time : 2022-12-01
The advantages of customized smart facing holder in china compared with traditional cameras

The advantages of customized smart facing holder in china compared with traditional cameras

The history of customized smart facing holder in china from appearance to development is not long, and it developed with the development of intelligent technology. But in just a few years, smart PTZ cameras have become one of the more common smart hardware products in the eyes of the public. Many families will buy a few customized smart facing holders in china to put them at home to protect their homes. Be safe and be the guardian of your home.
Time : 2022-11-29
How should Buy smart facing holder be maintained

How should Buy smart facing holder be maintained

The PTZ camera monitoring equipment consists of many parts, and the camera and PTZ are very important parts of the entire monitoring equipment. Buy smart facing holder usually needs to pay attention to maintenance to ensure that it can work normally. Especially when you are monitoring the background and cannot see the image on the monitor, the first thing to check is whether the camera and dome camera can work.
Time : 2022-11-25
smart facing holder supplier(s) Troubleshooting and system maintenance of common PTZ camera faults

smart facing holder supplier(s) Troubleshooting and system maintenance of common PTZ camera faults

The use of intelligent integrated PTZ cameras has effectively improved the efficiency of inspections, allowing high-tech means to "guard the home" for the venue. So what are the troubleshooting and system maintenance of common PTZ camera faults for smart facing holder supplier(s)?
Time : 2022-11-23
Three common troubleshooting methods of china smart facing holder

Three common troubleshooting methods of china smart facing holder

(1) China smart facing holder company believes that there are many possibilities: 485 is broken, check the 485 control module or controller of the DVR, and replace it with other substitutes for testing. (2) One of them is broken and causes the control line to fail. Try powering off one by one. As long as one of them fails on the control line, it will affect the entire control line. (3) A certain address confusion leads to address conflicts affecting the control line, and an error in one address may cause the addresses of other lines to be unrecognizable. (4) Software failure, the control settings in the software are wrong, such as control protocol, control address, port frequency, etc. (5) There is a problem with the PTZ control line.
Time : 2022-11-21
The smart facing holder factory analyzes the cause of the failure of the gimbal

The smart facing holder factory analyzes the cause of the failure of the gimbal

The smart facing holder factory found that the pan/tilt of the pan/tilt camera does not work properly or cannot rotate at all shortly after use, which is a common failure of the pan/tilt. In addition to product quality factors, smart facing holder factory believes that this situation is generally caused by the following reasons:
Time : 2022-11-17
Previous page
1
2
…
19

ENTER YOUR EMAIL TO STAY IN TOUCH

Username used for comment:
邮件订阅
Description:

邮件订阅

CONTACT US

这是描述信息

© 2021 Topjoy International development Group Co., Ltd., All rights reserved.  粤ICP备15077352号    Powered by 300.cn