smart facing holder factory Talking about the internal structure of the gimbal
What is the internal structure of the gimbal? smart facing holder factory Let's start with the use of the gimbal.
The PTZ is a supporting device for installing and fixing the camera, which can ensure that the camera can move in four directions, up, down, left, and right, to obtain a larger viewing angle. The function and function of the monitoring PTZ is to support the adjustment of the focal length, depth of field, and aperture of the camera to obtain better image capture effects at any time.
smart facing holder factory The gimbal and protective cover provide a suitable working environment for the camera and lens, and can realize the horizontal and vertical adjustment of the shooting angle. The PTZ decoder converts the digital signals from the control terminal into electrical signals to drive the PTZ to operate. The smart facing holder factory considers that the decoder is the core device for the control of the pan/tilt and lens, through which the camera can be controlled by the computer interface through the software, and the pan/tilt can adjust the camera's pan/tilt angle after the camera is installed on the fixed pan/tilt. In order to achieve the calibration angle, this is the function and function of the monitoring gimbal.
The smart facing holder factory reminds the gimbal to carry the camera to rotate in both horizontal and vertical directions. There are two motors inside the gimbal, one of which is responsible for horizontal rotation and the other for vertical rotation.
smart facing holder factory Remind that the gimbal has horizontal and vertical limit bolts, and the gimbal has two micro switches to realize the limit function.