What is the internal structure of the gimbal of the smart shooting gimbal factory? The smart shooting gimbal factory starts with the use of the gimbal.

　　The gimbal of the smart shooting gimbal factory is a supporting device for installing and fixing the camera, which can ensure that the camera can move in four directions, up, down, left, and right, so as to obtain a larger viewing angle. The function and function of the monitoring gimbal of the smart shooting gimbal factory is to support the adjustment of the focal length, depth of field and aperture of the camera, so as to obtain better image acquisition effects at any time.

　　The smart shooting gimbal factory found that the gimbal and protective cover provide a suitable working environment for the camera and lens, and can realize the horizontal and vertical adjustment of the shooting angle. The PTZ decoder converts the digital signals from the control terminal into electrical signals to drive the PTZ to operate.

　　The decoder is the core equipment of the gimbal and lens control. It can be used to control the lens and gimbal through the software through the computer interface. After the camera is installed on the fixed gimbal, the camera's pan and tilt angles can be adjusted to achieve the calibrated angle. , this is the function and function of the monitoring PTZ.

　　The pan-tilt of the smart shooting pan-tilt factory carries the camera to rotate in two directions, horizontal and vertical. The pan-tilt of the smart shooting pan-tilt factory is equipped with two motors, one of which is responsible for the rotation in the horizontal direction, and the other is responsible for the rotation in the vertical direction.

　　The PTZ of the intelligent shooting PTZ factory has horizontal and vertical limit bolts, and the PTZ has two micro switches to realize the limit function. When the rotation angle reaches the preset limit bolt, the micro switch will cut off the power supply, and the pan/tilt will stop rotating.