The faults to be avoided in the wholesale smart shooting gimbal
Smart shooting gimbal cannot be used
1. The smart shooting gimbal interface cannot be operated.
1) Follow the above steps to check the code and transfer 2) Install the corresponding PTZ control patch 3) Notify the supplier
2. When the wholesale smart shooting gimbal clicks, the code turns on or there is a relay in the decoder, but some functions cannot be controlled
1) Wholesale smart camera gimbal factory recommends checking whether the wiring of the uncontrollable functions is correct. 2) Wholesale smart shooting gimbal, lens and other equipment are in good condition. 3) Whether the voltage of the functional port of the decoder and whether the switch output is normal.
3. The gimbal does not move normally during control
If the rotation cannot be stopped, the wholesale smart camera gimbal factory recommends to test the port separately. If it is normal, check whether the port corresponding to the decoder works normally.
When wholesale smart shooting gimbal found that the video produced mosaic, software problems, please consult the supplier.
In addition to the above problems, there are also some more prone to faults when wholesale smart shooting gimbal It may cause damage to the gimbal.
ENTER YOUR EMAIL TO STAY IN TOUCH
- 2A,Block A,Central Avenue,Baoyuan Road,Xixiang,Bao An District,Shenzhen,China,518100
© 2021 Topjoy International development Group Co., Ltd., All rights reserved. 粤ICP备15077352号 Powered by 300.cn