The customized smart shooting phone holder in china is a part that can move the camera. It can be manipulated by the controller to rotate up, down, left, and right to make up for the only defect in the monitoring direction of the fixed-point camera. The operator can control the rotation of the gimbal so that the camera monitors the direction the operator wants to look at. The location, shooting angle, and video compatibility of customized smart shooting phone holder in china are the most important considerations for the application of PTZ cameras.

　　Notes for customized smart shooting phone holder in china:

　　1. When choosing a customized smart shooting phone holder in China, it is best to choose a pan/tilt with a control input terminal and a network video input/output interface installed on a fixed position of the pan/tilt, and between the fixed position and the rotating position. (That is, between the camera and the camera) There is a connection between the control input line and the video output line of the camera and the lens formed by a soft spiral line.

　　2. The minimum ambient illumination of the surveillance site should be ten times higher than the minimum illumination (sensitivity) required by the camera.

　　3. The sensitivity of the customized smart shooting phone holder in China should not be greater than 1.01x (F1.4) for color cameras installed outdoors or with low ambient illumination, or a color camera that can automatically convert to black and white images under low illumination conditions should be selected.