Best smart facing holder company Share the precautions for bearing gimbal
Best smart facing holder company believes that in order to adapt to the installation of different IP cameras and protective covers, the load-bearing capacity of the PTZ should be different. A suitable weight-bearing PTZ should be selected according to the total weight of the selected network camera and protective cover. The bearing capacity of the indoor gimbal is smaller, and the volume and weight of the gimbal are also smaller.
Best smart facing holder company found that the outdoor gimbal has a large load-bearing capacity because it must install a network camera with a protective cover on it. It is also larger in size and weight. The bearing capacity of the indoor PTZ camera is about 1.5kg~7kg, and the bearing capacity of the outdoor PTZ camera is about 7kg~50kg. Other heads are miniature heads, such as those that are mounted with the camera in a dome or weather shield.
Best smart facing holder company recommends that when choosing a PTZ camera, it is best to choose a PTZ with control input and network video input and output ports installed on the fixed position of the PTZ, and the fixed part and the rotating part should be installed on the PTZ. There is a connection between the control input line and the video output line of the camera and lens formed by a soft spiral line.
Best smart facing holder company believes that such a gimbal will not be damaged due to long-term use after installation and use. This is especially true of the gimbal for outdoor use. The minimum ambient illuminance of the surveillance site should be ten times higher than the minimum illuminance required by the camera.
ENTER YOUR EMAIL TO STAY IN TOUCH
- 2A,Block A,Central Avenue,Baoyuan Road,Xixiang,Bao An District,Shenzhen,China,518100
© 2021 Topjoy International development Group Co., Ltd., All rights reserved. 粤ICP备15077352号 Powered by 300.cn